Can You Put Drano In A Washing Machine

Can You Put Drano In A Washing Machine – Everything You Need To Know!

Drano is one of the most popular drain cleaners on the market because of its ability to quickly dissolve gunk in sink drains. With this in mind, you might wonder, can you put Drano in a washing machine?

No, you cannot put Drano directly in the machine as it contains a highly reactive chemical, which could damage the washer. However, you can use it in the machine’s drain hose to clear clogs. After all, it is safe for use on plastic and metal pipes. 

So, how do you use Drano in a washer’s drain hose? Are there any safe alternatives available? Keep reading to find out. 

Can You Put Drano in a Washing Machine?

No, you can’t put Drano directly in your washing machine. However, you can put it in the washer’s drain hose to blast away clogs. This is because the product is safe for use on all pipes, including plastic and metal. And as it turns out, a washer’s drain hose is typically made of high-quality polypropylene.

Generally,  according to the manufacturer, Drano products are safe for use in the bathroom drains. You can also use in the garbage disposals, kitchen, and other drains, such as laundry sinks. 

That said, if you decide to use Drano in your machine’s drain hose to remove gunk, follow these steps:

  • Step 1: Unplug the drain hose from the washer.
  • Step 2: Slowly pour half of the bottle over the drain. But if the clog is severe, you can use the entire bottle. You can use the Drano Max Gel Clog Remover or the Drano Balance Clog Remover.
  • Step 3: Let the product sit in the drain for 15 to 30 minutes.
  • Step 4: Pour boiling water inside the drain to flush out the gel or clog remover. 

One reason you should not put Drano directly in the washer is because it contains sodium hydroxide, known as lye, as its active ingredient. Lye is a highly corrosive substance. Therefore, if used often, it could damage the machine’s bearing seals and gaskets, shortening your washer’s lifespan.

Secondly, the common cause of washing machine clogging is usually soiled clothing. As it turns out, Drano only breaks down clogs caused by organic matter. Therefore, it will not clear a washer drain blockage caused by a piece of clothing.  

What Are Drano Safer Alternatives to Use in a Washing Machine?

So what are the safest alternatives you can use to clean your washing machine’s clogs? Read on to find out.

Drain Snake or Auger

One of the best and safest alternatives to Drano is using a drain snake to unclog your washer’s drain. A drain snake features a corkscrew-type spring at the end of the cable for removing the clogs. 

Moving on, a drain auger works similarly to a drain snake. However, it is longer, making it more effective for removing clogs sitting deep in a washer’s drain. 

To use the drain snake or auger, follow the steps below. 

  • Step 1: Unplug your washer from the power source.
  • Step 2: Disconnect the drain hose from the washer.
  • Step 3: Insert your drain snake into the drain hose until you feel some resistance.
  • Step 4: Rotate the snake’s handle clockwise as you push it further down.
  • Step 5: Pull out the drain snake slowly from the hose to remove the clogs.
  • Step 6: Install the drain hose back on the machine. 

Hot Water and Baking Soda

Boiling water works by loosening the gunk and holding the clog in the drain together. However, it is best suited for minor clogs when used alone. For severe clogs, you can use hot water with dish soap or baking soda, known as sodium bicarbonate. Here is how this method works:

  • Step 1: With the machine unplugged, disconnect the drain hose.
  • Step 2: Squeeze about a half cup of dish soap down the hose to lubricate the clogs
  • Step 3: Next, pour boiling water into the drain. You can use a funnel to prevent spillage.
  • Step 4: If the blockage does not clear away, pour at least a gallon of boiling water down the drain pipe.
  • Step 5: Add about one cup of baking soda to the drain for every gallon of hot water.
  • Step 6: Wait for approximately 10 minutes for the mixture to work. Then, spill cold water down the machine’s drain pipe to confirm that it is unclogged. 

Baking Soda and Vinegar

Instead of Drano, you could use baking soda and white vinegar to unclog your washer’s drain. The mixture helps break clogs through a chemical reaction. To use these two products:

  • Step 1: Unplug your machine and disconnect the drain hose.
  • Step 2: Pour a pot of hot water down the drain using a funnel.
  • Step 3: Next, add a cup of baking soda to the drain, followed by a cup of vinegar.
  • Step 4: Cover the drain plug with a piece of clothing. Then, let the solution sit there for 5 to 10 minutes, allowing it to work.
  • Step 5: Pour another pot of hot water down the drain again to flush out the baking soda, vinegar solution, and clogs.

People Also Asked

Below, we will respond to frequently asked questions about putting Drano in your washer.

Q: What happens if you leave Drano in the washer drain for too long?

If left to sit in the drain for too long, more than 30 minutes, Drano can damage the machine’s standpipe. As a result, the pipe may develop cracks and start leaking.

Q: What do you do if you accidentally put Drano in a washing machine with clothes?

You simply remove the clothes from the washer and clean them thoroughly with hot, soapy water. Make sure to rinse the clothes thoroughly with clean water. As for the washer, you should run an empty cycle with bleach to flush out all the drano.

Q: What should you avoid when using drano to clear clogs in a washer?

Never use an auger or drain snake immediately while Drano is still inside your washer’s drain hose. This is because the Drano can accidentally splash in your hands or face, causing skin irritation and burns. 

The Bottom Line

Drano is an effective clog remover. It works fast to remove gunk on most drains, including garbage disposals, laundry sinks, bathroom and kitchen drains. However, while you can use it on a washing machine drain hose, it is not recommended.

The good news? There exist many safe alternatives to Drano for clearing clogs in a washer. For example, you could use a combination of hot water and dish soap or baking soda. All these alternatives work effectively as long as you execute them correctly.

Leave a Reply

Your email address will not be published. Required fields are marked *